No, you cannot mix R134 and R134a refrigerants. They are both HFC (hydrofluorocarbon) based refrigerants but have different chemical compositions that do not allow them to be mixed without damaging the system. Mixing these two refrigerants can cause corrosion, poor heat transfer and reduced cooling capacity as well as damage the compressor or other parts […]

No, you should not drive with a broken intake manifold bolt. This is because the bolt serves an important purpose in keeping the engine components together and if it is broken, it can lead to serious damage to your engine. If you attempt to drive with a broken intake manifold bolt then it could cause

No, you should not mix 0W20 with 5W30. Motor oil is specifically formulated to meet the needs of different engines and temperatures. Mixing them can cause damage to engine components such as pistons, rings, valves, and other moving parts due to improper lubrication or viscosity characteristics. Additionally, mixing two oils with different ratings could lead

Inertia switches are used to detect collisions and shut off engines or electrical systems in order to prevent further damage. If the switch has been triggered, it needs to be bypassed in order for the engine or system to start again. This can be done by locating the inertia switch, which is typically located under

A cracked rim will look like a break in the metal of the wheel. It may appear as a jagged line, or it could be more subtle and hard to spot with the eye. The crack can often be felt upon touching the surface of the rim, and sometimes it is accompanied by corrosion around

Yes, it is customary to tip window tinters. This is because window tinting can be a labor-intensive job, and the tinter may have spent several hours working on your vehicle. Additionally, tipping for services such as window tinting helps show appreciation for the hard work done by the tinter. Generally speaking, tips should range from

To fix a car visor that won’t stay up, first check if the metal clip holding it in place is broken or missing. If so, you can buy replacement clips at an auto parts store. Alternatively, you can secure the visor with duct tape. Start by positioning the edge of the tape against outside surface

20% tint is a window film that blocks 20% of the light coming into a vehicle or building. It appears as a very light black shade and can be almost unnoticeable when looking at it from outside. From the inside, the 20% tint will give you a good amount of privacy but still allow plenty

Darkening existing window tint is a relatively simple process. The easiest way to darken the tint is to purchase a darker-grade pre-cut window film and install it on top of the existing tint. Before purchasing, make sure that you measure your windows carefully so that the new film fits perfectly over them. After measuring, purchase

Turn on the fuel pump by first turning off any electrical switches connected to it, including the circuit breaker, fuse, and fuel cutoff switch. Next, locate the fuel pump relay and remove it from its socket. Then connect a jumper wire between terminals 30 and 87 of the relay. This will bypass the ignition switch