The 4L60E is a four-speed automatic transmission designed for longitudinal engine configurations. The 4L60E uses torque converter clutch (TCC) to improve fuel economy while providing smooth shifts. The TCC can be drained by removing the drain plug on the bottom of the transmission pan and allowing the fluid to drain out. Be sure to catch […]

To downshift a 8 speed truck, put the transmission in neutral, then depress the clutch pedal all the way to the floor. While depressing the clutch pedal, move the shifter from its current gear position to a lower gear position. release the clutch pedal slowly until you feel resistance, then give the engine some gas

To do a tug test CDL, first put the truck in neutral. Then, while standing on the ground beside the rear wheels, pull back on the steering wheel with all your strength. If the truck moves backward, then it passes the tug test CDL. Get your commercial driver’s license (CDL) You will need this to

To dismiss a message on the Buick Encore, simply press and hold the OK button on the steering wheel. The message will disappear and you can continue on your way. To dismiss a message on your Buick Encore, simply press the “OK” button on the steering wheel This will bring up the message center on

Stability control is a safety feature that helps keep your vehicle from skidding or rolling over. However, there are times when you may want to disable this feature, such as when driving in off-road conditions. To do so on a Peterbilt, you will need to access the computer system and make a few changes. Here’s

In order to disable reverse mute, you will need to access the settings menu for your media player. Once you are in the settings menu, locate the “Reverse Mute” option and toggle it off. This will ensure that your media player does not automatically mute itself when it is played in reverse. Open the Control

The Ram 1500 comes with a feature called Mds. This stands for Multi-Displacement System and it allows the engine to run on four cylinders when full power is not needed. This can save fuel, but it can also cause the engine to run rough when accelerating from a stop. If you want to disable this

To disable the Lamp Out Light on your Dodge Ram, simply locate the lamp out module under the hood on the driver’s side. Once located, disconnect the two wires that are connected to it. Open the hood of your Dodge Ram and locate the lamp out light Unplug the wire harness from the back of

If you want to disable the door ajar feature on your Ford F150, you will need to remove the fuse for the interior lights. This can be done by opening the fuse box, which is located under the hood, and removing the fuse for the interior lights. Find the fuse box in your Ford F150

To disable the door ajar warning on a Ford Explorer, open the door and press the button on the side of the door. This will turn off the warning light. The first step is to open the door and locate the fuse box The fuse box is usually located on the driver’s side of the