To disable the door ajar warning on a Ford Explorer, open the door and press the button on the side of the door. This will turn off the warning light.
- The first step is to open the door and locate the fuse box
- The fuse box is usually located on the driver’s side of the vehicle
- Once you have found the fuse box, look for a label that says “Door Ajar
- ” If there is no label, consult your owners manual to find which fuse controls the door ajar warning light
- Next, use a pair of pliers or a screwdriver to remove the fuse
- Be sure to hold onto the end of the fuse so it doesn’t fall into the depths of the fuse box
- With the fuse removed, reinsert it into the slot upside down
- This will effectively disable door ajar from working
- You may also want to tape over the end of the fuse so it can’t be accidentally turned back on
Ford Explorer Door Ajar Light Stays on
If you have a Ford Explorer, you may have noticed that the door ajar light stays on even when all of the doors are closed. This can be annoying and may make you think that there is something wrong with your car. However, there is actually a simple explanation for this phenomenon.
The reason the door ajar light stays on is because the car has a feature called “auto-lock.” When this feature is enabled, the doors will automatically lock when the car reaches a certain speed. However, if one of the doors is not fully closed, the auto-lock feature will not engage and the door ajar light will stay on.
So, if you’re wondering why the door ajar light stays on in your Ford Explorer, now you know!
Credit: www.autoworldguide.com
How Do I Disable Door Ajar Alarm?
If you have a door ajar alarm on your vehicle, chances are it is annoying you. Here is how to disable it.
First, find the fuse box in your vehicle.
It is usually located under the hood or near the kick panel on the driver’s side. Once you find it, look for a fuse labeled “Door Ajar” or “Burglar Alarm” and pull it out. This will disable the alarm.
If you can’t find a fuse labeled specifically for the door ajar alarm, try pulling out the “BCM” (body control module) fuse. This should also disable the alarm.
If neither of these options work, consult your owner’s manual or take your car to a professional to have them figure out how to disable the door ajar alarm on your specific vehicle model.
Why Does My Car Keep Saying My Door is Open But It’S Not?
If your car is constantly telling you that your door is open when it’s not, there are a few possible explanations. It could be a problem with the door sensor itself, or with the wiring connecting the sensor to the rest of the car. If you have an aftermarket alarm system installed, it could also be a problem with that.
Here are some things to check if you’re not sure what’s causing the issue:
1. Check the door sensor itself. Make sure it’s clean and free of any debris that could be interfering with its operation.
Also, try gently pressing on it to see if it feels loose or misaligned. If so, you may need to replace it.
2. Check the wiring connecting the door sensor to the rest of the car.
Make sure all connections are tight and free of corrosion. If you see any damaged wires, they will need to be replaced.
3. If you have an aftermarket alarm system installed, make sure it is properly connected to the door sensor and that all its settings are correct.
Sometimes these systems can cause false alarms if they’re not set up correctly.
What Do You Do If the Door Ajar Warning Light Stays On?
If your car has a door ajar warning light, it’s important to know what to do if it stays on. This light is usually located on the dash and indicates that one of the doors is not fully closed. If this light comes on, you should check all of the doors to make sure they are shut properly.
If the light remains on after all of the doors are shut, it could be an indication of a problem with the door latch or another issue. In this case, it’s best to take your car to a mechanic to have it checked out.
Why Does My Car Keep Saying Driver Door Ajar?
If you’re like most people, you probably don’t think much about your car’s door ajar warning light. But if it’s constantly illuminated, it can be a real annoyance. So why does this happen and what can you do about it?
There are a few reasons why your car might keep saying driver door ajar. The most common reason is that the switch that tells the computer whether or not the door is open or closed is faulty. This switch is usually located on the door itself, and over time, it can become loose or corroded.
If this is the case, simply replacing the switch should solve the problem.
Another possible reason for a constantly lit door ajar warning light is a problem with the wiring. If there’s any damage to the wires that run from the switch to the computer, it could cause interference and trigger false readings.
In this case, you’ll need to have an experienced mechanic take a look at your car to diagnose and fix the issue.
Finally, it’s also possible that your car’s computer itself is malfunctioning. If this is the case, unfortunately there’s not much you can do on your own and you’ll need to take it in to get serviced by a professional.
How to repair the door ajar light on Ford Explorer
Conclusion
If you have a Ford Explorer, you may have noticed that the door ajar warning chime can be quite annoying. Fortunately, there is a way to disable this feature. Here’s how:
1. Open the hood of your Explorer and locate the fuse box.
2. Find the fuse labeled “Dome Lamp” and remove it.
3. Replace the fuse with a new one of the same amperage rating.
4. Close the hood and start your Explorer’s engine. The door ajar warning chime should now be disabled.
