However, situations may arise where you need to put the vehicle in neutral, such as when towing it or performing maintenance procedures. Learning how to put your dodge durango in neutral is a quick and easy process, but it’s essential to do it correctly to avoid any accidental damage or mishaps.
In this article, we will provide you with a step-by-step guide on how to put your dodge durango in neutral, including safety measures to follow.
Credit: www.ebay.com
How to Put Dodge Durango in Neutral- Step by Step Guide
To put a Dodge Durango in neutral, especially if the battery is dead, follow these steps carefully:
-
Turn Off the Engine and Set the Parking Brake – Make sure the engine is off (if possible) and engage the parking brake to prevent the vehicle from rolling.
-
Access the Shift Lock Override – Locate the shift lock release mechanism, typically found under a small plastic cover near the gear shift lever. You may need a flathead screwdriver to pry off this cover.
-
Press the Override Button – Once you access the shift lock override, press the button or insert a key into the slot, and then move the shifter into neutral. This process may vary slightly depending on the year and model, so refer to your owner’s manual for specific instructions.
-
Release the Parking Brake (if needed) – Once the vehicle is in neutral, carefully release the parking brake if you need to push or tow the vehicle.
These steps allow you to shift into neutral if there’s a dead battery or other issues that prevent starting. Make sure to refer to the owner’s manual for any model-specific instructions or consult a professional if you’re unsure.
How to Put Dodge Charger in Neutral Without Key
To put a Dodge Charger in neutral, you can use the following method, especially useful if the battery is dead:
-
Engage the Parking Brake – Ensure the vehicle is secure and cannot roll.
-
Locate the Shift Lock Override – Open the center console near the shifter area and locate a small cover or a panel labeled “Shift Lock” or similar. You may need to use a flathead screwdriver to pry this open.
-
Press the Override Button – Inside, you should see a manual release slot or a button. Insert a small tool (like a screwdriver) or your finger to press down on the release.
-
Move the Gear Shift – While holding down the release, shift the gear lever to the neutral position.
This method allows you to shift into neutral for towing or moving the vehicle without the key. For more specific instructions, check your owner’s manual, as the exact location of the shift lock may vary by year.
The Need To Put Your Dodge Durango In Neutral
To put your dodge durango in neutral, you’ll first need to understand what it means. Neutral is a state in a vehicle’s transmission where the engine is disengaged from the wheels, allowing the car to coast without acceleration or deceleration.
There are a few different reasons why you might need to put your durango in neutral, including towing, jump-starting the engine, or going through a car wash.
Whatever the reason, it’s important to follow your durango’s specific instructions for putting the vehicle in neutral, as the process can vary between models.
By knowing how to safely and correctly put your durango in neutral, you can ensure you’re ready for whatever the road throws your way.
How To Put Your Dodge Durango In Neutral In Different Situations
Putting your dodge durango in neutral can be useful in various driving situations. On roads, it can be done by shifting the gear stick to the neutral position, and it’s also important to engage the emergency brake.
On hills, you should follow the same process, but it’s important to note that you should never shift into neutral while driving uphill.
It’s best to come to a complete stop before shifting into neutral. In the case of a dead battery, the process is slightly different. You can use jumper cables to connect to another vehicle, which will allow you to shift into neutral.
With these tips, you can safely and easily put your dodge durango in neutral when needed.
How to get a 2017 Dodge Durango into neutral
Troubleshooting Tips For Dodge Durango Neutral Gear
Having trouble shifting your dodge durango into neutral? Here are some troubleshooting tips. The issue could be a faulty shift cable or a problem with your gear selector module. Check the shift cable for damage or detachment and replace if necessary.
Inspect the gear selector module for signs of damage or wear and replace if needed. If these solutions don’t work, try resetting the transmission control module or taking the car to a certified mechanic for further diagnosis. Don’t let a faulty neutral gear hinder your driving experience – follow these tips to get your car back in gear.
Frequently Asked Questions Of How To Put Dodge Durango In Neutral
What Are The Possible Reasons That The Dodge Durango Won’t Go Into Neutral?
The most common reasons your dodge durango won’t go into neutral are a malfunctioning brake pedal switch, low transmission fluid, or a faulty shifter cable.
Can I Flat Tow My Dodge Durango?
Yes, you can flat tow your dodge durango if it is equipped with a two-speed transfer case. However, if it’s a 4×4 model without a two-speed transfer case, it needs to be transported on a flatbed or trailer.
Conclusion
After reading through our guide, you should now have a better understanding of how to put your dodge durango in neutral. It is essential to take the necessary precautions to ensure your safety and protect your vehicle. Remember to always use the emergency brake and shift appropriately to prevent putting stress on the transmission.
