1. Begin by locating the clutch slave cylinder. It is usually located next to the transmission bell housing on Ford Ranger models. 2. Place a large oil pan underneath the slave cylinder and locate the bleeder screw which should be attached to it with a cap or plug over it. 3. Unscrew this cap/plug and […]
How to Bleed Clutch Ford Ranger Read More »
Eagle Specialty Products manufactures crankshafts in their facility located in Mt. Vernon, Illinois. The company has been producing performance-oriented crankshafts since 1975 and is one of the leading suppliers of crankshafts for both domestic and import applications. They specialize in custom made billet steel 4340 forged stroker crank shafts for high performance engines used by
Where are Eagle Crankshafts Made Read More »
Tie rods are an important part of a vehicle’s steering system, and driving with bad tie rods can be extremely dangerous. Generally, it is not advisable to drive with bad tie rods for more than a few miles as the issue can get worse quickly. If the problem is severe enough, you should pull over
How Long Can You Drive With Bad Tie Rods Read More »
Yes, Toyota 3.4 is an interference engine. Interference engines are designed so that the piston’s travel in the cylinder overlaps with both valves being open at the same time. In other words, when one valve is open, it allows air and fuel to enter as well as allowing exhaust gases to escape while simultaneously preventing
Is Toyota 3.4 an Interference Engine Read More »
The best way to push a piston back into a brake caliper is by using a C-clamp. To start, you will need to loosen the bleeder screw on the caliper and attach one end of a piece of clear tubing to it. Connect the other end of the tube to a bottle filled with fresh
How to Push Piston Back in Brake Caliper Read More »
An alternator wire melting is usually caused by an excess of electrical current flowing through the wire. This overcurrent can be due to a number of factors, such as an overloaded alternator or a faulty regulator. An overload occurs when the amount of electricity being generated exceeds what the car needs, causing too much energy
What Causes Alternator Wire to Melt Read More »
Yes, Toyota Camry needs 4 wheel alignment. Having the wheels on your vehicle aligned is important for a variety of reasons. It ensures that all four tires are running in the same direction and provides better control of your car, making it easier to handle when driving. Additionally, having an alignment done can help improve
Does Toyota Camry Need 4 Wheel Alignment Read More »
To reset a brake override malfunction in a Toyota vehicle, first ensure that the battery is connected and operational. If necessary, jump-start the vehicle or replace the battery with a new one. Next, locate the fuse box and turn off all of the car’s fuses except for those related to brakes and accessories (i.e., power
How to Reset Brake Override Malfunction Toyota Read More »
No, brake fluid cannot be used for power steering. Brake fluid is designed to handle the high pressure and heat created when braking a vehicle while power steering fluid is designed to lubricate and cool the components of your car’s power steering system. Using brake fluid in place of power steering fluid could damage seals,
Can Brake Fluid Be Used for Power Steering Read More »
The answer to the question “Can You Drive with a Bad Transfer Case” is yes, you can drive with a bad transfer case. However, this is not recommended as it could cause further damage and create safety risks for yourself and other drivers. A faulty transfer case can lead to issues such as transmission fluid
Can You Drive With a Bad Transfer Case Read More »
