Posts by Skeet Dugazon

The cv boot clamp is a very important part of the car. It keeps the grease in and the dirt out. If it is not tightened properly, it can come…

If you need to test your trailer lights but don't have a vehicle handy, there are a few ways to do it. One is to use a portable battery pack.…

To test the stator of a motorcycle with a multimeter, first remove the stator cover and unscrew the three bolts that hold the stator in place. Next, disconnect the wires…

To test a Pertronix Ignitor, first disconnect the negative terminal of the battery. Next, locate the two wires coming from the Ignitor. One wire will be red and the other…

To test the optispark, you will need a few tools. A multimeter, a 12 volt test light, and a small screwdriver. You will also need to know how to read…

Testing fuel injectors on a Harley-Davidson ensures that they’re functioning properly and delivering the correct amount of fuel to the engine. Faulty injectors can lead to poor performance, rough idling,…

There are a few ways to test a fuel tank selector switch. One way is to use a multimeter to check for continuity between the terminals on the switch. Another…

To test the Ford multifunction switch, you will need a voltmeter. With the engine off, disconnect the negative battery cable. Locate the multifunction switch on the steering column and disconnect…

If the engine is idling and there is a significant drop in RPM when the EGR valve is opened, then it is likely functioning properly. If the EGR valve is…