If you have a flat tire on your Infiniti Qx50, the first thing you need to do is reset the flat tire warning. Here’s how:
- Park your Infiniti Qx50 in a safe place and turn off the engine
- Locate the flat tire pressure sensor, which is located on the driver’s side door pillar
- Use a small screwdriver to remove the cap from the sensor
- Press and hold the reset button for about 5 seconds until you hear a beep
- Replace the cap on the sensor and start your engine to complete the reset process
How To Reset Flat Tire Warning On The Infiniti Q50 (2014-2021)
Infiniti Flat Tire Visit Dealer Reset
If your Infiniti has a flat tire and you need to reset the system, there are a few things you’ll need to do.
First, find a safe place to park your car. Once you’re parked, turn on your hazard lights and locate the spare tire.
You’ll also need to find the jack and lug wrench, which should be stored in the trunk of your car. Using the lug wrench, loosen the bolts that are holding the wheel in place.
Once they are loose, use the jack to lift up the car so that you can remove the wheel.
Put the spare tire on in its place and tighten the bolts back up. Lower your car back down to the ground and make sure that everything is secure before you start driving again. If you have a flat tire, don’t panic!
Follow these simple instructions and you’ll be back on the road in no time.

Credit: www.reddit.com
How Do You Turn off the Tire Pressure Light on an Infiniti Qx50?
On most Infiniti models, the tire pressure light can be turned off by simply pressing and holding the BC (brake control) button on the instrument panel for about 5 seconds. The light should go off after a few seconds. If it does not, you may need to reset the system by disconnecting and reconnecting the battery.
Where is Tpms Reset Button?
If your vehicle is equipped with a Tire Pressure Monitoring System (TPMS), you may need to reset the system from time to time. Here’s a quick guide on where to find the TPMS reset button in your car.
In most cases, the TPMS reset button will be located on the dashboard, near the speedometer.
If you can’t find it there, check the owner’s manual for your specific vehicle make and model. Once you’ve located the button, press and hold it for a few seconds until the TPMS light on your dash goes off.
If your vehicle doesn’t have a dedicated TPMS reset button, you may be able to reset the system by disconnecting and reconnecting the battery.
However, this method may not work for all vehicles, so it’s always best to consult your owner’s manual or an experienced mechanic before trying this.
How Do You Turn off a Flat Tire Warning?
Most new cars these days come with a tire pressure monitoring system, or TPMS. This system uses sensors to monitor the air pressure in your tires and alerts you when it gets too low. When you get a flat tire, the TPMS will usually activate a warning light on your dash.
If you have a flat tire and want to turn off the warning light, you can do so by resetting the system. To reset the TPMS, start by locating the sensor for the affected tire. The sensor is usually located inside the wheel well, near the valve stem.
Once you’ve found the sensor, use a small magnet to trigger it. This will cause the warning light to turn off.
How Do You Reset the Tpms on a 2015 Infiniti Q50?
If your Infiniti Q50 is equipped with Tire Pressure Monitoring System (TPMS), you will need to reset the system after replacing one or more tires or wheels on your vehicle. Fortunately, this is a relatively easy process that can be completed in just a few minutes.
Here’s how to do it:
1. Start by turning on your Q50’s engine. 2. Then, press and hold the “SET” button located on the instrument panel for about 5 seconds until the low tire pressure warning light flashes 3 times.
2. This indicates that the TPMS system has been reset and is now ready to learn the new tire pressure readings.
3. Now, drive your Q50 around for a few minutes so that the TPMS system can relearn the new tire pressure readings.
4. That’s it! You’ve now successfully reset the TPMS on your Infiniti Q50!