What is the Red Light on My Harley Speedometer

The red light on your Harley speedometer is an indicator that you are exceeding the maximum speed limit for the gear that you are in. For example, if you are in second gear and the red light comes on, it means that you are going too fast for second gear and should shift to a higher gear.

The Red Light on My Harley Speedometer is a warning light that comes on when the motorcycle’s speed exceeds the limit set by the manufacturer. This is to prevent damage to the engine and other parts of the motorcycle. When this light comes on, it’s time to slow down!

Warning Lights on Harley-Davidson Speedometer

If you’re like most Harley-Davidson riders, you probably don’t give your speedometer much thought – until one of the warning lights comes on. Then it’s all you can think about until you get to a safe place to pull over and investigate. So, what do those warning lights mean?

Here’s a quick guide: Red Light: This is the big one – it means something is seriously wrong with your bike and you need to stop immediately. It could be an engine issue, a transmission problem, or even low oil pressure.

Whatever the cause, don’t try to ride it out – get to a safe place and call for help. Amber Light: An amber light indicates a less serious problem that doesn’t require an immediate stop, but should be dealt with as soon as possible. It could be something as simple as low fuel or a burned-out headlight bulb.

Or it could be something more serious, like overheating brakes or an electrical system issue. Either way, take care of it as soon as you can. Green Light: A green light is simply letting you know that everything is functioning properly – no problems to worry about here!

What is the Red Light on My Harley Speedometer

Credit: www.youtube.com

What Does the Red Light Mean on My Harley Speedometer?

If you’re riding a Harley-Davidson motorcycle, then you probably know that the red light on the speedometer indicates that the engine is overheating. However, what you might not know is why this happens or how to fix it. There are several reasons why your Harley’s engine might be overheating.

One possibility is that the coolant level is low. Another possibility is that the cooling fans aren’t working properly. Additionally, a blockage in the cooling system could cause the engine to overheat.

If your Harley’s engine is overheating, there are a few things you can do to try to fix the problem. First, check the coolant level and add more if necessary. Next, check the operation of the cooling fans.

If they’re not working properly, replace them. Finally, if there appears to be a blockage in the cooling system, flush it out and replace any damaged parts.

What Does the Red Light on My Motorcycle Mean?

When you see a red light on a motorcycle, it typically means that the bike is equipped with an anti-lock braking system (ABS). This safety feature prevents the wheels from locking up during sudden braking, which can help to avoid a crash. Some bikes also have a red light that indicates when the fuel level is low.

What is the R on My Harley Speedometer?

When it comes to the R on your Harley speedometer, there are a few different things that it could mean. First, it could be an indicator that your bike is in “road” mode as opposed to “race” mode. In road mode, your bike’s speed is limited to 85 mph.

Race mode, on the other hand, allows you to go up to 100 mph. To change between the two modes, simply press and hold the button on the left side of your instrument panel. It’s also possible that the R stands for “reserve.”

This indicates how much fuel is left in your tank before you need to refuel. To check your reserve level, simply press and release the button on the left side of your instrument panel. The needle will then move to indicate how much fuel is remaining in your tank.

How Do You Reset the Speedometer on a Harley-Davidson?

If you own a Harley-Davidson, you may eventually need to reset the speedometer on your bike. This process is not difficult, but it is important to follow the steps carefully in order to avoid damaging your speedometer. Here’s how to reset the speedometer on a Harley-Davidson:

1. Park your bike on level ground and turn off the engine. 2. Remove the negative (-) battery cable from the battery using a wrench. This will prevent electrical damage while you’re working on the speedometer.

3. Use a small Phillips head screwdriver to remove the two screws that hold the faceplate of the speedometer in place. Be careful not to lose these screws! 4. Gently pull on the faceplate until it comes free from the rest of the speedometer assembly.

You may need to wiggle it a bit to get it started, but be careful not to break any of the plastic tabs that hold it in place. 5. Locate the white plastic drive gear inside the speedometer assembly (it should be visible once you’ve removed the faceplate). Use a flathead screwdriver or similar tool to pry this gear out of its housing; be careful not to damage it as you do so!

6a. If your model year is 2000 or later: Once you’ve removed the drive gear, locate and gently removethe silver tab that sits behind it; this tab engages with teeth onthe drive gear and helps keep it in place, so be careful not tobend or break it as you remove it! Set boththe drive gear and tab aside for now – they’ll go back into placelater when we reassemble everything.

. 6b. If your model year is 1999 or earlier: Thereis no silver tab present behindthe drive gear; simply setthe drive gear aside fornow as we’ll be reusingit later duringreassembly.

. 7a . For all model years: Locateand gently remove thenotched white plastic ringthat sits adjacentto whereyou justremovedthedrivegearfrom;thisringalsoengageswithteethon adrivegearandhelpskeep initplace, sobecarefulnot tobendorbreakit asyouremoveit!. Setthisringasidefor now -we’llbe reuseingitas we reassembleeverything.. 7b .

Harley Davidson warning light red dash light code red

Conclusion

If you have a Harley-Davidson motorcycle, you may have noticed a red light on your speedometer. This light is called the “idiot light” and it is there to remind you to check your oil level. When the idiot light comes on, it means that your oil level is low and you need to add more oil to your bike.

Scroll to Top