In order to turn on the remote start feature on your Pontiac G6, you will need to first ensure that the car is turned off and all of the doors are closed.
Once this has been confirmed, you can press and hold the “Lock” button on your key fob for about five seconds.
After a few moments, you should see the parking lights flash and hear the car’s engine start up – indicating that the remote start function has been activated successfully.
- To turn on the remote start feature on your Pontiac G6, first make sure that the car is turned off and all doors are closed
- Next, locate the black button on your key fob marked “Remote Start” and press and hold it for three seconds
- After three seconds have passed, the car’s headlights will flash to indicate that the remote start feature has been activated successfully
- You can now use the remote start feature by pressing and holding the “Lock” button on your key fob for two seconds while standing within range of your car (usually about 30 feet)
- Once you press the “Lock” button, you should see the car’s headlights flash again to signal that it is starting up
- The engine will run for 10 minutes before shutting off automatically unless you cancel the remote start by pressing the “Unlock” button on your key fob
How to Tell If Pontiac G6 Has Remote Start
If you own a Pontiac G6, you may be wondering if it has remote start.
Here’s how to tell:
1. Look for a key fob with a black button labeled “Remote Start.”
This should be located on the driver’s side of the vehicle, near the door handle.
2. Press and hold the “Remote Start” button for two seconds. The car’s engine should start and the parking lights will turn on.
3. If the car doesn’t start, it may not be equipped with remote start. Alternatively, there could be an issue with the battery or other electrical system components.
Credit: www.amazon.com
How Do I Know If My Pontiac G6 Has Remote Start?
If you own a Pontiac G6, you may be wondering if it has remote start. Here’s how you can tell:
1. Look for a button on your key fob that says “Remote Start” or has a picture of a car with a key in it. This is the remote start button.
2. If your car has this button, it means that it is equipped with remote start. To use it, simply press and hold the button for three seconds. The car should then start and the parking lights will turn on to let you know that the car is running.
3. You can also tell if your car has remote start by looking in the owner’s manual. There should be a section that discusses the feature and how to use it.
How Do I Enable Remote Start?
Assuming you would like tips for installing a remote car starter: Installing a remote car starter is a great way to get the convenience of starting your car from inside your house or office on cold winter days. But before you buy and install one, there are a few things you need to know.
To start with, check your car’s owner manual. Some cars have systems that can be easily damaged by aftermarket remote starters, so it’s important to make sure yours will work with one. Once you’ve done that, here are some tips for choosing and installing a quality remote starter:
Choose a system that comes with two remotes, so you always have a backup in case one gets lost. Also look for systems that offer keyless entry, so you don’t have to fumble for keys in the dark or in bad weather. When it comes to installation, choose a reputable installer who has experience installing remote starters.
This is not a job for amateurs! A good installer will take into account factors like your car’s battery location and whether your ignition switch is located on the steering column or dash. They should also test the system thoroughly before they leave, to ensure everything is working properly.
Does the 2009 Pontiac G6 Have Remote Start?
The 2009 Pontiac G6 does in fact have remote start. This is a great feature to have if you are someone who likes to warm up their car before they get in it on a cold day, or if you want to cool it down before you get in on a hot day.
It’s also great for security purposes, as you can start your car and let it run for a few minutes before you get in, so that anyone who may be hiding inside won’t be able to surprise you.
How Do I Use My Remote Start on My Key Fob?
Assuming you have a remote start system in your vehicle, here are instructions on how to use it:
1. Make sure your car is parked in a well-ventilated area, as the engine will be running and emitting exhaust fumes.
2. With your key fob in hand, press and hold the “remote start” button for two to three seconds.
The parking lights on your car should flash to indicate that the system is working.
3. Once the parking lights have flashed, release the button and wait for the engine to start. It may take a few seconds for the engine to catch and turn over.
4. To turn off the engine, simply press and hold the “remote start” button again for two to three seconds. The parking lights will flash once more to indicate that the system has been deactivated.
Remote start on Pontiac G6
Conclusion
If you’re looking to add a little convenience to your life, consider installing a remote start system in your Pontiac G6. Remote start systems allow you to start your car from a distance, making it easy to warm up your vehicle on cold mornings or cool down the interior on hot days. Best of all, most remote start systems can be installed relatively easily by anyone with basic automotive knowledge.
In this article, we’ll show you how to turn on the remote start system in your Pontiac G6.
