Body filler is a two-part epoxy that is used to fill in dents and holes in auto body panels. It is applied with a putty knife and spread over the area to be repaired. Once it dries, it can be sanded smooth.
If it is too thick, it can be thinned with body filler reducer.
- sand the area around the body filler to create a smooth surface 2
- mix the body filler with a hardener 3
- apply the body filler to the area that needs to be filled 4
- allow the body filler to dry 5
- sand the dried body filler until it is smooth
Thinning Body Filler With Lacquer Thinner
As anyone who’s worked with body filler knows, one of the most important things you can do is to thin the filler out properly before applying it. If you don’t, you run the risk of creating an uneven surface that will be difficult to sand down later. Lacquer thinner is often used for this purpose, as it evaporates quickly and doesn’t leave behind any residue.
There are a few things to keep in mind when using lacquer thinner to thin body filler. First, make sure you’re using a high-quality lacquer thinner – cheap brands can actually make the filler harder to work with. Second, only add a small amount of thinner at a time – too much will make the filler too runny and difficult to control.
Finally, be sure to mix the filler thoroughly after adding the lacquer thinner – otherwise it won’t evenly distribute throughout the mixture.
If you follow these tips, thinning body filler with lacquer thinner should be no problem!
Credit: www.classiccarrestorationclub.com
Can You Make Body Filler Thinner?
If you’re working with body filler, also known as bondo, you might find that it’s too thick for your needs. Fortunately, you can thin body filler to make it easier to work with. The best way to thin body filler is to add a solvent such as acetone or xylene.
You can also use a commercial thinner designed for use with body filler. Just be sure to add the solvent slowly and mix thoroughly until you’ve achieved the consistency you need.
How Do You Get Rid of Thick Body Filler?
Body filler is a common sight in auto body repair. It’s used to fill in small dents and holes, and can even be used to build up new features on a car. But once you’re done using it, how do you get rid of the excess?
The first step is to remove any loose body filler with a putty knife. You don’t want to leave any behind, as it will just make the next step harder.
Once all the loose filler is gone, you can start sanding.
We recommend starting with coarse sandpaper (60 grit or higher) and working your way up to finer grits. The goal here is to create a smooth surface that’s ready for paint or primer.
If you’re having trouble getting rid of all the body filler, there are a few power tools that can help speed up the process.
A DA sander or rotary tool with abrasive discs can make quick work of stubborn areas. Just be careful not to overdo it and damage the underlying metal!
Once you’re satisfied with the results, give the area a final wipe down with prep solvent and you’re good to go!
Can You Use Acetone on Bondo?
Bondo is a two-part putty used to fill dents and holes in metal, fiberglass and wood. The main ingredients in Bondo are polyester resin and hardener, but there are also several other ingredients that give Bondo its properties. One of those ingredients is acetone.
Acetone is a solvent that is used in many products, including some paint thinners and nail polish removers. It is also a very good degreaser. When you use acetone on Bondo, it dissolves the polyester resin, leaving only the hardener behind.
This can be useful if you need to remove Bondo from something before it dries completely.
However, once the Bondo has dried, using acetone will not dissolve it. In fact, trying to remove dried Bondo with acetone can actually damage the surface beneath it.
So if you’re working with Bondo, be sure to use acetone sparingly and only when absolutely necessary.
Can I Thin Bondo With Lacquer Thinner?
Bondo is a two-part putty that is used to fill in holes and cracks in surfaces. It is made of a resin and a hardener, which are mixed together and then applied to the surface. Once it dries, it can be sanded and painted.
Lacquer thinner is a solvent that is used to thin lacquer-based paints. It can also be used to clean up paint brushes and other equipment after painting. Lacquer thinner will dissolve Bondo, so it can be used to remove Bondo from surfaces.
Conclusion
If you’re working with body filler for the first time, or if you’ve never had great results with it in the past, this guide is for you. We’ll show you how to properly thin body filler so that it goes on smoothly and evenly, without leaving behind any unwanted bumps or ridges.
The first step is to gather your supplies.
You’ll need a can of body filler, a putty knife, some sandpaper, and a container of reducer. Reducer is a solvent that’s specifically designed to thin out body filler without affecting its strength or durability.
Next, scoop out a small amount of filler onto your putty knife.
Add a few drops of reducer to the filler and mix them together until you have a smooth, creamy consistency. If the mixture is too thick, add more reducer until it reaches the desired consistency.
Now you’re ready to apply the filler to your project.
Start by spreading a thin layer over the area you want to fill. Use long, even strokes to avoid creating any unwanted ridges or bumps.
