The baffles in a Harley exhaust can be removed by first taking off the heat shields, if present. Next, remove the bolts that hold the baffles in place. Be sure to have replacement gaskets on hand, as well as new mounting hardware if needed.
Finally, reinstall the heat shields and enjoy your increased exhaust note!
- Park the Harley on its side stand and loosen the bolts that hold the heat shield in place with a socket wrench
- Lift the heat shield off of the exhaust pipe
- Unscrew the screws that hold the baffles in place with a screwdriver
- Pull out the baffles from the exhaust pipe
Pros And Cons of Removing Baffles
Removing the baffles from your motorcycle exhaust can give you a few different benefits. It can make your bike louder, which some people prefer, and it can also slightly increase your horsepower. On the downside, removing the baffles can also make your bike less stable at high speeds and increases the amount of vibration felt by the rider.
Credit: backyardrider.com
How Do You Remove Baffles from a Motorcycle Exhaust?
If you’re looking to remove the baffles from your motorcycle exhaust, there are a few things you’ll need to do. First, you’ll need to locate the baffles. They’re usually located near the end of the exhaust pipe, just before the muffler.
Once you’ve found them, you’ll need to use a wrench or pliers to loosen and remove the bolts that are holding them in place. Be careful not to damage the baffles as you remove them. With the baffles removed, your motorcycle will be significantly louder than it was before.
What Happens When You Remove Baffles on Motorcycle Exhaust?
There are a few things that happen when you remove the baffles on a motorcycle exhaust. For one, the bike will be louder. This is because the baffles help to muffle the sound of the engine and without them, there is nothing to stop the noise from escaping.
Additionally, the bike will likely have an increase in power. This is because the restrictions that the baffles place on the engine are removed and it is able to breathe more freely. Finally, removing the baffles can also lead to increased fuel consumption as the engine is working harder.
How Do You Remove the Baffles on a Harley Davidson Motorcycle?
If you’re looking to remove the baffles on your Harley Davidson motorcycle, there are a few things you’ll need to do. First, you’ll need to locate the two screws that hold the baffle in place. These screws are usually located near the front of the motorcycle, just behind the headlight.
Once you’ve found these screws, simply unscrew them and carefully remove the baffle. Be careful when removing the baffle, as it’s easy to damage or lose small parts like screws and washers. If possible, it’s always best to work with someone who has experience with this kind of repair so they can help guide you through the process.
How Can I Make My Stock Harley Exhaust Louder?
Assuming you are referring to a Harley-Davidson motorcycle, there are a few ways to make the exhaust louder. One is to install aftermarket pipes. This is probably the most effective way to increase the sound of the exhaust.
Another way is to remove the baffles from the stock pipes. This will also make the exhaust louder, but may not be as effective as aftermarket pipes. Finally, you can rejet the carburetor, which will slightly increase engine power and make the exhaust louder.
How to remove baffles out of Harley stock exhaust
