If your Acura TLX has a dead battery and you need to put it in neutral, you may find that the standard process doesn’t work. This can be challenging, especially if you’re trying to move or tow the vehicle. Understanding how to put your Acura TLX in neutral with a dead battery is crucial for these situations.
In this guide, we’ll walk you through the steps to manually shift your Acura TLX into neutral, even when the battery is completely drained. This easy-to-follow process ensures you’re prepared for emergencies, keeping your vehicle safe and ready to move.
How to Put Acura TLX in Neutral With Dead Battery
Follow these steps to manually shift your Acura TLX into neutral when the battery is dead:
Step 1: Engage the Parking Brake
Before you start, make sure the parking brake is engaged. This will prevent your vehicle from rolling unexpectedly once it’s in neutral, especially if you’re on an incline.
Step 2: Locate the Manual Shift Release
In your Acura TLX, there’s a hidden manual shift release designed for situations like this. Here’s how to find it:
- Look for the small cover near the gear selector on the center console.
- Use a flathead screwdriver or a similar tool to gently pry open the cover. This will expose the shift release mechanism.
Step 3: Insert a Tool to Release the Shifter
Once the cover is off, you’ll see a small slot or button inside the opening.
- Insert a flathead screwdriver, key, or other thin tool into the slot.
- Press down firmly while holding the brake pedal.
- This action will release the shift lock and allow you to manually move the gear selector.
Step 4: Shift the Gear to Neutral
While holding down the shift release, move the gear selector into the neutral position. At this point, your Acura TLX should now be in neutral, allowing you to push or move the car even without battery power.
Step 5: Prepare for Towing or Moving
Now that the vehicle is in neutral, you can safely move it to the desired location. If you’re preparing the car for towing, make sure the parking brake is off and ensure proper towing procedures are followed.
Tips for Handling a Dead Battery in an Acura TLX
- Check Your Battery: Before you go through the process of manually shifting to neutral, ensure that the battery is indeed dead and not just low. You can try jump-starting the vehicle first to avoid having to use the manual override.
- Be Cautious When Pushing: If you’re moving the car manually after putting it in neutral, make sure you have enough help to push the car safely. Never attempt to push the car on a slope or near heavy traffic without proper assistance.
- Get the Battery Replaced: A dead battery could indicate deeper issues with your Acura TLX’s electrical system. After moving the car, be sure to check the battery and replace it if necessary.
Why It’s Important to Know How to Shift Your Acura TLX Into Neutral
Knowing how to shift your Acura TLX into neutral with a dead battery is essential in case of emergencies. Whether you need to tow your vehicle or push it out of a dangerous location, this knowledge can save you time, frustration, and even damage to your car.
Since modern vehicles rely heavily on electronics, understanding manual overrides like the shift release is crucial for any car owner.
Credit: www.edmunds.com
How Do You Put a 2003 Acura Tl in Neutral With a Dead Battery?
If your 2003 Acura TL has a dead battery, you will need to put it in neutral in order to push it. Follow these steps:
1. Open the hood and locate the battery.
2. Disconnect the negative terminal from the battery using a wrench.
3. Push the car until it is in neutral.
4. Reconnect the negative terminal to the battery and close the hood.
How Do I Put My 2016 Acura Mdx in Neutral?
If your 2016 Acura MDX is equipped with an automatic transmission, you can put it in neutral by depressing the brake pedal and then shifting the transmission into the “N” position. If your vehicle has a manual transmission, you can shift into neutral without depressing the clutch pedal.
However, it’s always a good idea to depress the clutch pedal when coming to a stop so you don’t accidentally stall the engine.
Conclusion
If your Acura TLX won’t start, and you suspect a dead battery, you can put it in neutral to push start it. First, make sure the parking brake is engaged. Then, with the key in the “on” position, press and hold the brake pedal while shifting into neutral.
Once in neutral, release the brake pedal and quickly press the accelerator to push start the car.
