To put a 2014 jeep grand cherokee in neutral, press and hold the “engine start/stop” button for two seconds while the vehicle is in park. The jeep grand cherokee is a popular mid-sized suv that comes with many features and capabilities, including the ability to go off-road.
However, even the most capable vehicle can have issues sometimes. If you need to tow your 2014 jeep grand cherokee, it may be necessary to put it in neutral. Fortunately, this is a simple task that can be done quickly and easily. In this article, we will give you step-by-step instructions for putting your jeep grand cherokee in neutral, so you can tow it safely and efficiently.
Credit: www.motortrend.com
Step 1: Turn On The Vehicle
To put your 2014 jeep grand cherokee in neutral, start by turning on the vehicle. Press the brake pedal with your foot and push the button on the gear shift, then move it into the neutral position. Double-check that the gear shift is in neutral and release the brake pedal.
Keep your foot on the brake pedal while you start the engine. Once you hear the engine running smoothly, you can release the brake pedal and enjoy your vehicle in neutral. Following these steps will help ensure that your jeep grand cherokee safely and smoothly goes into neutral.
Step 2: Press The Brake Pedal
To put your 2014 jeep grand cherokee in neutral, start by pressing the brake pedal. This is a crucial step. Apply pressure to the pedal with your foot. Once you have done that, locate the shifter lever. It is usually located on the central console or the steering column.
Once you have located it, grasp the shifter lever, and move it gently towards the neutral position. You will notice the shift indicator on the dashboard move towards the middle of the indicator. Adjust the shifter until it’s in the correct position.
Congratulations! You have successfully put your 2014 jeep grand cherokee in neutral.
Putting a 2014 Jeep Grand Cherokee into neutral manually
Step 3: Shift The Gear Lever
To shift a 2014 jeep grand cherokee into neutral, you need to follow specific guidelines, starting with holding the brake pedal firmly. After that, press the start/stop button for two seconds without pressing the brake pedal. Next, shift the gear lever to the “n” position and release the brake pedal.
Once the “n” appears on the instrument panel, the car is in neutral. It’s essential to ensure the car is stationary before shifting gears and avoid any sudden movements. Following these steps will help you to shift your 2014 jeep grand cherokee into neutral mode smoothly and safely.
Remember to avoid starting any sentence with conditional terms or phrases and make each sentence concise and seo-friendly for easy reading.
Step 4: Move The Gear Shift To Neutral
To put your 2014 jeep grand cherokee in neutral, follow these simple steps. Step 4 requires you to move the gear shift to neutral. Make sure to apply the brakes and turn the key to the “run” position. Next, press and hold the brake pedal, then move the gear shift to the neutral position.
Finally, release the brake pedal and confirm your vehicle is in neutral. Adhering to these guidelines should ensure that you can easily and safely move your car into neutral. Remember to always practice caution and refer to your owner’s manual for further instruction.
Frequently Asked Questions Of How To Put 2014 Jeep Grand Cherokee In Neutral
How Do I Put My 2014 Jeep Grand Cherokee In Neutral?
To put your 2014 jeep grand cherokee in neutral, first start the engine, then press the brake pedal and shift the gear lever to the neutral position. If you have a grand cherokee with a quadra-lift air suspension system, you will need to disable it before shifting to neutral.
What Is The Purpose Of Placing My Jeep Grand Cherokee In Neutral?
Placing your jeep grand cherokee in neutral is important when towing it. It ensures the vehicle’s transmission isn’t damaged while being towed. It’s also recommended when going through an automatic car wash or when moving the jeep short distances without turning on the engine.
Is There A Specific Procedure To Follow To Put My Jeep Grand Cherokee In Neutral?
To put your jeep grand cherokee in neutral, make sure your foot is on the brake pedal. Then, shift the four-wheel-drive transmission gear to the neutral position and release the brake pedal slowly. Finally, shift the automatic transmission gear shift to neutral.
Can I Put My Jeep Grand Cherokee In Neutral While It Is Still Moving?
No, it is not safe to put your jeep grand cherokee in neutral while it is still moving. This can cause damage to your transmission and make it difficult to control the vehicle. Always come to a complete stop before shifting into neutral or any other gear.
Conclusion
Now you know how to put a 2014 jeep grand cherokee in neutral. It’s a simple process that can come in handy in a variety of situations. Whether you need to tow your jeep behind another vehicle, jump-start your engine or get it up onto a flatbed, this knowledge will serve you well.
Make sure you follow the steps carefully and keep safety in mind at all times. Remember, putting your jeep in neutral will disengage the wheels from the transmission, which means it can roll freely. Always make sure the emergency brake is engaged and chock the wheels before proceeding.
With this knowledge, you can confidently put your jeep in neutral and handle any situation that comes your way. Get ready to hit the road with your trusty jeep and enjoy all the adventures it can bring!
