The 6.7 Powerstroke is a powerful engine, but you can make it even more powerful and louder with a few modifications. First, install a larger turbocharger. This will increase airflow and boost power.
Next, add a performance exhaust system. This will allow the engine to breathe better and produce more noise. Finally, install an aftermarket intake system.
This will help the engine get more air, which will also increases power and noise. Follow these steps and you’ll have a 6.7 Powerstroke that sounds amazing!
- Remove the stock exhaust system from the truck
- This will give you more room to work and allow you to see all of the parts that need to be replaced
- Cut off the muffler at the end of the exhaust pipe
- This will make room for a larger, aftermarket muffler
- Install the new muffler in place of the old one, making sure it is facing the correct direction
- Secure it with bolts or welding, depending on what type of muffler you have chosen
- Reattach the rest of the exhaust system, starting at the front and working your way back
- Make sure all connections are secure before moving on to step 5
- Test-fit everything before permanently attaching any parts
- Once you are satisfied with how everything looks and fits, weld or bolt all joints in place
How to Remove Turbo Silencer Ring on 6.7 Powerstroke
If you have a 6.7 Powerstroke, you may eventually need to remove the turbo silencer ring. This is a relatively easy process, but there are a few things you need to know before you get started.
First, you’ll need to disconnect the negative battery cable.
Then, remove the charge air cooler outlet pipe from the turbocharger. Next, unbolt the four bolts that hold the turbocharger to the exhaust manifold. Be careful not to lose any of the gaskets or hardware during this process.
Once the turbocharger is disconnected, you can remove the turbo Silencer Ring by simply pulling it off of the turbine shaft. There’s no need to replace this part unless it’s damaged or missing; however, if you do need to replace it, make sure you get one that’s specifically made for your 6.7 Powerstroke engine.
Credit: kcturbos.com
How Can I Make My Diesel Turbo Whistle Louder?
If you’re looking to make your diesel turbo whistle louder, there are a few things you can do. First, check to make sure that your turbocharger is in good working order. If it’s not, then it’s likely that the whistle you’re hearing is actually just air escaping from the turbocharger itself.
Once you’ve confirmed that your turbocharger is functioning properly, there are a few things you can do to help amplify the sound of the whistle.
One option is to install a larger diameter exhaust pipe. This will create less backpressure on the exhaust side of the turbocharger, allowing it to spin faster and creating a louder whistle.
Another option is to install an aftermarket wastegate actuator. This will allow you to adjust the amount of boost pressure being sent to the engine, which can also help increase the speed of the turbocharger and thus create a louder whistle. Finally, if your vehicle is equipped with an intercooler, make sure that it’s clean and free of any debris or blockages.
A clogged intercooler can restrict airflow and cause your turbocharger to work harder than necessary, which can lead to increased noise levels.
Why Does My 6.7 Powerstroke Sound Like a Typewriter?
If you own a 6.7 Powerstroke, you may have noticed that it sounds like a typewriter. This is because the engine is equipped with a device called an exhaust brake. The purpose of the exhaust brake is to slow down the engine when going down hills or decelerating.
When the exhaust brake is engaged, it produces a loud, distinctive sound that some people compare to a typewriter. While this noise can be annoying, it’s actually a good thing, as it means your exhaust brake is working properly.
Does Cold Air Intake Help 6.7 Powerstroke?
A cold air intake helps your 6.7 Powerstroke by increasing the amount of cool, dense air that reaches the engine. This allows the engine to make more power and improve fuel economy. The increased airflow also helps to keep the engine cooler, which reduces wear and tear.
How Much Hp Can Stock 6.7 Powerstroke Injectors Handle?
The stock 6.7 Powerstroke injectors can handle up to 750 horsepower. However, if you’re looking to push your truck’s performance to the limit, it’s recommended that you upgrade to aftermarket injectors that can handle more power.
TURBO NOISE SOUND TEST (No Limit Fab Stage 2 Air Intake on My 2017 6 7 Powerstroke!) INSTALL
Conclusion
This blog post discusses how to make a 6.7 Powerstroke turbo louder. The author recommends two main methods: adding an aftermarket exhaust or upgrading the stock exhaust. Aftermarket exhausts are generally louder than stock, but they can be expensive.
Upgrading the stock exhaust is a less expensive option and can still produce significant results. The author provides detailed instructions for both methods, including what parts to purchase and how to install them.