There are a few things you can do to fix your electronic throttle control Chrysler 300. One thing you can do is to check the wiring harness for any loose or damaged wires. Another thing you can do is to clean the throttle body and Throttle Position Sensor (TPS) with carburetor cleaner.
You may also need to adjust the TPS if it is out of adjustment. If none of these things fix your problem, then you may need to replace the electronic throttle control unit.
- Check your engine light
- If it is illuminated, then there is a problem with your electronic throttle control system and you will need to have it diagnosed by a professional
- If your engine light is not illuminated, then check the fuse box under the hood for a blown fuse
- Replace the fuse if necessary and see if the problem persists
- If the problem persists, then disconnect the battery and reconnect it after a few minutes
- This will reset the electronic throttle control system and may fix the problem
- If none of these steps work, then you will need to take your car to a professional mechanic or dealership to have it repaired or replaced
How to Reset Electronic Throttle Control Manually Chrysler 300
If your Chrysler 300 is having trouble with its electronic throttle control, you may be able to reset it manually. Here’s how:
1. Disconnect the negative battery cable.
2. Wait at least five minutes before reconnecting the negative battery cable. This will allow the system to reset itself.
3. Reconnect the negative battery cable and start the engine.
The electronic throttle control system should now be reset and working properly.
Credit: www.amazon.com
How Do You Reset the Electronic Throttle Control System on a Chrysler 300?
If your Chrysler 300 is having issues with the electronic throttle control system, you may need to reset it. Here’s how:
1. Disconnect the negative battery cable.
2. Remove the air intake ductwork.
3. Unplug the electrical connector from the throttle body.
4. Use a clean cloth to wipe any dirt or debris from around the throttle plate area.
5. Check for any obstructions in the throttle body bore and remove them if necessary.
6..Install the air intake ductwork and reconnect the negative battery cable.
.
How Much Does It Cost to Fix the Electronic Throttle Control System on a Chrysler 300?
According to RepairPal.com, the average cost for repairing an electronic throttle control system on a Chrysler 300 is between $832 and $863. This cost includes labor and parts, and does not account for any additional fees that may be charged by the mechanic.
How Do You Fix an Electronic Throttle Control System?
There are a few things that can go wrong with an electronic throttle control system, but the most common problem is a dirty or failed throttle position sensor. This sensor tells the computer how far the throttle is open, and if it’s not working properly, the engine will run erratically or stall.
To clean the sensor, you’ll need to remove it from the throttle body and clean it with brake cleaner or electrical contact cleaner.
If this doesn’t fix the problem, then you’ll need to replace the sensor.
Is the Electronic Throttle Control Expensive to Fix?
If your car is equipped with electronic throttle control, also known as drive-by-wire, you may be wondering how much it would cost to fix if it were to malfunction. Although the electronic throttle control system consists of many different parts, such as the throttle body, sensors, and actuator motor, repairs should not be too expensive. The most common issue with electronic throttle control is a dirty or failing throttle body sensor, which can usually be cleaned or replaced for around $200-$300.
If the problem is more serious, such as a faulty actuator motor or wiring issue, repairs could cost upwards of $1000. However, since electronic throttle control is a relatively new technology, most cars that are equipped with it are still under warranty. So if you do have any issues with your electronic throttle control system, be sure to check your warranty first before paying for any repairs out of pocket.
Chrysler 300 Lightning Bolt Limp Mode FIX
Conclusion
If you own a Chrysler 300, you may have experienced issues with the electronic throttle control. In this blog post, we will show you how to fix this problem.
The electronic throttle control is located in the engine bay, and it controls the amount of air that enters the engine.
If this component fails, it can cause your car to stall or even not start at all.
Fortunately, there are a few things you can do to fix this problem yourself. First, check the fuse that supplies power to the electronic throttle control.
If this fuse is blown, replace it with a new one.
Next, check the wiring harnesses for any loose or damaged connections. If you find any issues, repair or replace them as necessary.
Finally, test the electronic throttle control by starting your car and depressing the accelerator pedal. If everything is working properly, your car should run smoothly without any issues.