Driving with a damaged CV joint can be dangerous and should not be done for any length of time. A damaged CV joint will cause vibrations, clunking noises, or difficulty steering. It is best to have the vehicle inspected by a mechanic as soon as possible to determine if the axle needs replaced. In some […]
How Long Can You Drive With a Damaged Cv Joint Read More »
To test the foot pedal switch on a Power Wheels vehicle, start by turning off the power. Then use a multimeter to check for continuity between each of the wires connecting to the foot pedal switch. If there is no continuity, then replace the switch with a new one. If there is continuity present, then
How to Test Power Wheels Foot Pedal Switch Read More »
The most common reason why your steering wheel pulls to the right is that you have some type of misalignment in your front wheels. This can be caused by a variety of things, such as incorrect tire pressure, worn or damaged suspension components, an imbalanced wheel or tire assembly, or even something like an improperly
Why Does My Steering Wheel Pull to the Right Read More »
A solenoid valve is a type of valve that uses an electric current to control the flow of liquid or gas. If your solenoid valve becomes stuck, it could prevent water from flowing properly and cause damage to other components in your plumbing system. To fix a stuck solenoid valve, first turn off the electricity
How to Fix a Stuck Solenoid Valve Read More »
No, an aftermarket catalytic converter is not typically loud. This type of device helps reduce the amount of toxic pollutants that are released into the atmosphere by trapping them inside and converting them to less harmful substances. While some other types of exhaust systems can be quite loud, this type is designed to produce minimal
Is Aftermarket Catalytic Converter Loud Read More »
A tone ring is a thin metal ring that helps to reduce noise and vibration in cars. It is usually made of steel or aluminum, and it attaches to the wheel hub assembly. Its purpose is to dampen the sound made by tires as they roll over road surfaces, providing a smoother ride for occupants.
What is a Tone Ring on a Car Read More »
The TPMS reset button on a Ford Edge is located in the center console, underneath the armrest. To access it, open the armrest and look for a small black button with an arrow pointing down. Push this button to begin the process of resetting your TPMS system. If you have difficulty locating it, refer to
Where is the Tpms Reset Button on Ford Edge Read More »
Yes, an alignment is needed after replacing sway bar links. The purpose of a wheel alignment is to ensure that all four wheels are pointing in the correct direction and that they are parallel with each other when viewed from the top. When you replace a sway bar link, it can affect the suspension geometry
Do You Need an Alignment After Replacing Sway Bar Links Read More »
It is not recommended to drive a car with a cracked exhaust manifold for any length of time. Depending on the severity of the damage, you may be able to drive for a short distance temporarily as long as there are no other problems or mechanical issues. However, driving with an exhaust leak can cause
How Long Can You Drive With a Cracked Exhaust Manifold Read More »
No, a speed sensor does not need to be programmed. Instead, it is designed to detect the speed of an object and send corresponding signals to its connected devices. It works by using a rotating magnet that passes through a loop of wire which generates electric pulses as the magnet rotates. These pulses are then
Does a Speed Sensor Need to Be Programmed Read More »
