The Service Theft Deterrent System (STS) on your Chevy Malibu 2019 can be reset by following these steps: 1. Turn the ignition key to the “On” position, but do not start the engine. 2. Press and hold the trip odometer button for at least five seconds.
The oil life display will show “100%.” 3. Release the button and turn the ignition key to the “Off” position for at least five seconds. 4. Repeat steps 1-3 two more times for a total of three cycles.
- Open the hood and disconnect the negative battery cable
- Locate the fuse box and remove the service theft deterrent system (STDS) fuse
- Wait at least 10 minutes before reconnecting the negative battery cable and starting the engine
- This will allow the STDS to reset itself
- If you have a key fob, you will need to reprogram it after the fuse is replaced and the battery is reconnected
How To Reset The 2016 Chevy Malibu Anti Theft System After Battery Is Dead
Service Theft Deterrent System Chevy Malibu 2018
If you’re the owner of a Chevy Malibu, you know that your car is equipped with a Service Theft Deterrent System. But what exactly is this system and how does it work? Here’s everything you need to know about the Service Theft Deterrent System in your Chevy Malibu.
The Service Theft Deterrent System is designed to protect your vehicle from being stolen while it’s in service. When you take your car to a dealership or repair shop for service, the system will automatically activate and prevent anyone else from starting your car without your permission. Here’s how it works: when you drop off your car at a dealership or repair shop, they’ll place a special key fob on the key ring with your keys.
This key fob has a unique code that corresponds to your VIN number. Once the key fob is activated, it will emit a signal that prevents anyone else from starting your car without the proper key fob. If someone tries to start your car without the key fob, an alarm will sound and the engine will not start.
The only way to deactivate the system is by using the special key fob with the correct code. So if you ever lose your keys or forget them at home, don’t worry – nobody will be able to steal your car!
Credit: gmauthority.com
How Do You Reset a Chevy Theft Deterrent?
If your Chevy has a theft deterrent system, you may need to reset it after disconnecting the battery. Here’s how: 1. Locate the theft deterrent module.
It’s usually located in the kick panel on the driver’s side or under the dash on the passenger side. 2. Disconnect the negative battery cable and wait for at least five minutes before reconnecting it. This will allow the system to reset itself.
3. Start the engine and test all of the electrical components to make sure they’re working properly.
How Do You Get the Service Theft Deterrent System Off?
Assuming you would like tips on how to disable a car’s Theft Deterrent System: One way to do this is to remove the fuse that powers the system. This will disable the system, but may also cause other electrical components in your car to stop working.
Another way is to disconnect the battery. This will also disable the system, but you’ll have to reconnect the battery later when you want to use your car again. If your car has an aftermarket alarm system, you can usually disable the theft deterrent feature by following the instructions in your owner’s manual.
What Does It Mean When It Says Service Theft Deterrent System?
Theft deterrent systems are designed to make it more difficult for thieves to steal your car. They typically work by making it harder for the thief to get into the car or by making it easier for you to track down your car if it is stolen.
Many newer cars come with built-in theft deterrent systems, but you can also add aftermarket products to older cars.
